High polymer waterproof slurry specially used for Kuaishi wall coating is a two-component waterproof material composed of high polymer lotion mixed with a variety of inorganic materials, modified by a variety of additives, and inorganic powders such as cement.

Product number: LD-2015

Product specifications: 18KG

Construction technology 

1. Cleaning the grassroots

The surface of the base layer should be flat and solid, without sand, cracks, dust, oil stains, etc., in order to achieve a smooth surface as much as possible

2. Wet base layer

Wet the surface of the base layer with water, without open water

3. Mixing products

First, pour the liquid material into the bucket, stir while adding the powder material, and stir evenly

4. Applying waterproof slurry

The cross brushing method is used for painting, and the second layer of construction can be carried out after the first layer of painting

Matters needing attention

1. The temperature during construction should be between 5 ° C-35 ° C, and outdoor construction is prohibited on windy or rainy days; In case of low temperature and high humidity weather, it is necessary to extend the re coating maintenance time appropriately to achieve the best coating effect.

2. The slurry after opening should be used up within 2 hours.

3. Wet the base surface with clean water before construction, but there should be no exposed water on the base surface.

4. The storage temperature of liquid components should not be lower than 0 ° C.

5. Do not mix dried adhesive with water before use.

6. Before construction, please carefully read the construction instructions.

7. Please use appropriate protective measures during construction, such as gloves.