K11 universal gold waterproof slurry is a kind of two-component polymer modified water-borne environment-friendly waterproof material. The liquid is made of modified synthetic environment-friendly polymer lotion and multi-functional water-borne additives by special process. The powder is composed of high-quality cement, selected quartz sand and unique polymer. Good water resistance, preventing hollowing, specially processed. It has the characteristics of strong adhesion, strong impermeability, good water resistance, preventing hollowing and brick falling, and is a non-toxic, harmless, pollution-free green and environmentally friendly product.

Product number: LD-3979

Product specifications: 18KG

Product features

1. The construction is convenient and can be directly carried out on damp substrates.

2. Strong adhesion with the concrete base surface. The active ingredients in the coating can penetrate into the pores and microcracks of the cementitious surface and produce chemical reactions, which can integrate with the substrate.

3. It has high strength and can directly paste ceramic tiles on the waterproof layer, never hollowing out bricks, especially suitable for waterproofing the interior and exterior walls of high-rise buildings, as well as the areas where ceramic tiles are pasted in kitchens and bathrooms.

4. Super strong anti permeability and anti national ability, after the waterproof layer is dried and solidified, it effectively blocks water from passing through, achieving no dripping.

5. Durable waterproofing. This coating is mainly based on inorganic materials and has no aging concerns, which can provide long-term waterproofing function.

6. Environmental protection. Sea free and harmless, it is a highly recommended waterproof coating for home decoration.

Construction technology 

1. Cleaning the grassroots

The surface of the base layer should be flat and solid, without sand, cracks, dust, oil stains, etc., in order to achieve a smooth surface as much as possible

2. Warm and Moisturizing Grassroots

Wet the surface of the base layer with water, without open water

3. Mixing products

First, pour the liquid material into the bucket, stir while adding the powder material, and stir evenly

4. Applying waterproof slurry

Using the cross brushing method, the second layer of construction can be carried out after the first layer of surface drying

Matters needing attention

1. The temperature during construction should be between 5 ° C-35 ° C, and outdoor construction is prohibited on windy or rainy days; In case of low temperature and high humidity weather, it is necessary to extend the re coating maintenance time appropriately to achieve the best coating effect.

2. The slurry after opening should be used up within 2 hours.

3. Wet the base surface with clean water before construction, but there should be no exposed water on the base surface.

4. The storage temperature of liquid components should not be lower than 0 ° C.

5. Do not mix dried adhesive with water before use.

6. Before construction, please carefully read the construction instructions.

7. Please use appropriate protective measures during construction, such as gloves.