Product Introduction

Wall curing agent is a non-toxic, odorless, environmentally friendly, and high-performance interface treatment material. Wall reinforcement has excellent permeability and can fully infiltrate the surface of the substrate, making the base dense and improving the adhesion of smooth interfaces.

Product number: LD-3302C

Product specifications: 16KG

Why use wall reinforcement agent

1. New house decoration

When applying wall reinforcement agent to the base layer of the rough house, the excellent permeability of the wall reinforcement makes the base wall more dense, improves the bonding strength between the putty powder and the wall base layer, and effectively avoids hollowing.

2. Renovation of old houses

After removing the paint and applying it to the loose areas of the base layer, the hardness of the base layer can be improved, effectively strengthening the base material and bonding the wall surface with the putty layer

More sturdy.

Five Reasons to Use Quick Paint Wall Reinforcement Agent

1. Say goodbye to empty drums falling off

2. Strong adhesive strength

3. Excellent permeability

4. Moisture proof, acid and alkali resistant

5. Excellent water resistance

Construction Steps - Base Layer Gluing

1. Grassroots treatment and dust cleaning

Remove the floating soil, oil stains, and loose layers at the grassroots level to ensure that the wall is clean, not loose, dust-free, and free of grease.

2. Detailed node processing

Repair and improve the internal and external corners, as well as the heel of the pipe, with a trowel for precise filling. If the base layer has strong water absorption, it can be moistened with water first.

3. Configure mixing

Dilute the wall reinforcement agent with water, it is recommended to use an electric mixer

4. Base layer adhesive coating

Use a roller or brush to apply the reinforcing agent to the base layer, and use the cross brush method to apply a large surface of orange. Wait for the moisture to evaporate completely before proceeding to the next process.

Matters needing attention

1.When reinforcing the ceiling, it is not recommended to dilute it with water.

2.When making smooth concrete surfaces, it is recommended to use after roughening.

3. This product cannot be mixed with other adhesive products.

4. Wool products should be used up within two hours.

5. It is prohibited to apply latex paint directly on this product.

6. Remove the old paint film before using this product.

7. Please do not work in damp or cold weather (with temperatures below 5 ° C and relative humidity above 85 ° C).