Product features

1. Pure flavor formula, green and environmentally friendly.

2. No additives, no harmful substances

3. High coverage, large coating area, anti mold and alkali resistance, and easier construction.

Product number: LD-1101

Product specifications: 20KG

Color: White

Scope of use

New wall plastering base, gypsum board base, old coating, etc

Construction technology 

Basic treatment>>Gypsum leveling>>Scraping the first layer of putty>>Scraping the second layer of putty>>Polishing>Applying primer>>Applying topcoat

Common construction issues

1. Unsmooth coating

Reason: Impurities in the paint solution, too thick paint solution, and poor quality latex paint.

2. Sagging

Reason: The viscosity of the coating is too low and the coating is too thick

3. Blistering

Adding too much pigment or mixing impurities during coating preparation; Lacquer barrels, drums, or spray guns are not clean enough; Before the paint surface is completely dry, the infiltration of water causes the paint film to lose its adhesion; The wall was not cleaned thoroughly before painting.

4. Falling off

Latex paint is applied at a low temperature and fails to form a continuous film, resulting in cracking and falling off when exposed to water; Loose grassroots with oil stains and other pollutants, poor adhesion between the coating and the grassroots, resulting in peeling; The strength of the base layer putty is low,

5. Wall cracking

It may be caused by the shrinkage of the putty. If the first layer of putty is not completely dry, scrape the next layer of putty, and if the second layer of putty is not completely dry, brush the paint, causing the putty to dry and shrink, resulting in cracking of the subsequent layer.

6. Anti alkali powder shedding

Wet construction before the grassroots is dry; Not brushing the sealing primer or the coating is too thin.