Wall reinforcement is a wall curing agent, a substitute for 108 adhesive and interface agent. It is a green, environmentally friendly, and high-performance interface treatment material. It has excellent permeability and can fully infiltrate the surface of the wall base material. Through bonding, the base layer is compacted, improving interface adhesion, enhancing the bonding strength between mortar or putty and the wall surface, and preventing hollowing. Suitable for high-quality and environmentally friendly brick and concrete wall floors.

Product number: LD-3301

Product specifications: 18KG 9KG

Product features

1. No free formaldehyde, benzene, or methyl

2. Non toxic and odorless

3. Strong permeability

4. High bonding strength

Easy to complete construction in a few steps

Solve all kinds of wall problems

1. Clean the base surface

Use a shovel to clean the base surface that needs to be brushed

2. Dilute with clean water

Dilute the water by pouring it into the wall and solidifying it

3. Apply evenly

Apply 1-2 coats evenly, and reapply after drying

4. Completed after drying

Dry for about 4 hours under ventilation, apply putty after drying to enhance adhesion

Matters needing attention

1. When reinforcing the ceiling, it is not recommended to dilute it with water.

When making smooth concrete surfaces, it is recommended to use after roughening.

3. This product cannot be mixed with other adhesive products.

4. Woolen products should be used up within two hours.

5. It is prohibited to apply latex paint directly on this product.

6. Remove the old paint film before using this product.

7. Please do not work in damp or cold weather (with temperatures below 5 ° C and relative humidity above 85 ° C).