Product features

1. Green and environmentally friendly, lightweight with no risk of detachment.

2. Weather resistant and stain resistant, natural colored stones, clear stone patterns, and realistic imitation stones.

3. Stable particles and colors, easy maintenance and cleaning of coatings, and self-cleaning properties.

4. Excellent durability, excellent adhesion, good elasticity, and effective coverage of wall cracking.

5. A pure water-based and colorful formula that meets national environmental protection requirements. It does not pose any harm to human health and the environment during construction.

Product number: LD-2223

Product specifications: 20KG

Color: Adjustable

Scope of use

Architectural exterior walls, imitation granite curtain wall painting system, Roman columns, lines, rural self built house exterior walls, renovation of old walls (tile renovation), etc.

Construction technology 

1. Material configuration: Liquid stone paint

2. System features: Closed barrel packaging, water-based, single component paste form, multiple colors in one barrel, color following design;

3. Preparation of topcoat: After opening the barrel, gently pour it back and forth, and then use it directly without dilution. It is necessary to add water not exceeding 5% of the paint amount;

4. Construction method: Special spraying method, continuous and uniform point spraying as a whole, with internal pressure special spray gun as the tool (specific requirements should also be based on the size and distribution of color spots);

5. Construction tools: internal pressure spray gun, air compressor;

6. Construction frequency: 1-3 times, depending on the actual configuration needs;

7. Construction operation requirements: It is required to spray continuously in a point like manner, with fine and uniform details, consistent thickness, and consistent pattern distribution;

8. Drying and maintenance: After painting, it should be ensured that it is fully dry to avoid and prevent early rainwater and strong wind and dust weather;

9. Emphasize matters

① Please read the instructions carefully before spraying construction

② Before spraying construction, do a good job of debugging tools and facilities, confirming pressure, and conducting trial spraying work;

③ Before spraying construction, attention should be paid to weather conditions and changes. Construction should be carried out within 48 hours with minimal or no rain, to prevent and avoid initial rainwater;

④ The mixing of paint should be slow to prevent breakage or color mixing, and a small amount of water can be diluted if necessary; For those with grid design requirements, remove the tape and reserve grid lines before drying after spraying construction;

⑤ During the interval and end of painting, tools should be soaked and cleaned in a timely manner;

⑥ During construction, reference should be made to the "Five Unified Standards", which refer to the construction of the same wall surface at the same time period, the same batch of materials for the same wall surface, the same gunman for the same wall surface, the same construction method for the same wall surface, and the same tool for the same wall surface. Each gunman should carry a standard board with them.

Common construction issues

Problem point 1: Color difference and discoloration caused by the density and uniformity of the paint spraying on the sky colored stone, middle layer, and primer.

Problem 2: Color difference and discoloration caused by coating spraying techniques.

Problem point 3: Scars caused by improper repair.