This product is a nano polymer waterproof adhesive, which is a multifunctional A/B two-component waterproof and anti-corrosion coating composed of a new type of structural silicon modified resin and modified isocyanate. This product has outstanding UV resistance, superior environmental protection, wear resistance and anti slip, high and low temperature resistance, acid and alkali resistance and other chemical properties. At the same time, it has strong permeability, strong adhesion, and mechanical and physical properties such as self flow. It is an excellent anti-aging waterproof and anti-corrosion coating with excellent performance.

Product number: LD-3700

Product specifications: 1KG/set

Construction steps

01: Base cleaning and cleaning

Remove polishing wax and oil stains from the surface of ceramic tiles and clean thoroughly

02: Mixing materials

Mix A and B materials in a 1:1 weight ratio and stir evenly

03: First coating

After drying the base surface, apply the first coat of paint

04: Second coating

The first layer of coating should be dry and non stick to the hands, and the second layer should be applied in a criss crossing direction

Let it air dry for 1 to 3 days

Matters needing attention

1. Before construction, ensure that the base surface is hard, clean, and dry, otherwise it may affect the application effect of the product.

During construction, pay attention to clothing protection. If it accidentally splashes on clothing, it should be cleaned immediately, otherwise it will be more difficult to clean after solidification.

3. This product is not corrosive to the skin, but has strong stickiness. If it sticks to the eyes or skin, it should be rinsed with water in a timely manner to avoid increasing the difficulty of cleaning after solidification.

4. The recommended temperature for construction is within the range of 0-30 ° C (morning or evening construction is recommended in summer, and noon construction is recommended in winter). If encountering low temperature and high humidity weather, it is necessary to extend the re coating maintenance time appropriately to achieve the best coating effect.

5. This product is a two-component nano polymer waterproof adhesive. Before construction, it is necessary to thoroughly mix A and B materials before use. Uneven mixing or changes in proportion will affect the application quality and physical properties of the product. The error value is 0.1%

6. Do not allow minors to come into direct contact with this product to avoid risks such as accidental ingestion.