Lanton ceramic tile back coating adhesive is an environmentally friendly material made by high-temperature copolymerization of various imported polymer nanomaterials using a core-shell process. This product has super strong bidirectional bonding force, good water resistance, and weather resistance. After coating, it can form a strong bonding layer on the surface of the base layer, effectively avoiding quality problems such as loosening, hollowing, and peeling during ceramic tile adhesion.

Product number: LD-3201

Product specifications: 10KG 5KG 2KG1KG

Product features

1. Good water retention, not prone to hollowing.

2. Compared to cement, it has high bonding strength, without hollowing or peeling.

3. The use of adhesive on the back of the brick filling reduces the individual capacity of the building, and the traditional water consumption has also been reduced from 11-18KG to 4-SKG, thereby reducing the occurrence of building settlement and cracking.

4. The application of adhesive on the back of ceramic tiles is very convenient, and there is no need to wet the wall with tiles. The adhesive adhesion on the back of ceramic tiles is very obvious.

5. Green coated adhesive wall tiles are not subject to size restrictions, and can be used for tiles with a thickness of 600 "or below.

If it is a 600 * 120O ceramic tile, in addition to applying a layer of adhesive on the tile face to face, it is also necessary to apply a layer of adhesive on the wall, so that the tile has a very strong batch adhesion.

Reasons for choosing us

1. Strong and sturdy

Durable adhesive, anti air drum detachment

2. Excellent water resistance

Strong water resistance, suitable for long-term soaking areas such as swimming pools and reservoirs

3. Excellent weather resistance

Polymer polymer material, stable in properties, not affected by the environment

Common problems during construction

Q: Can the product be reused after being frozen?

A: Cannot. The lotion of this product has lost its bonding property due to its failure due to freezing. Please construct and store it at 5-35 ° C.

Q: Can water be added to the product?

A: Cannot. After opening the bucket and stirring evenly, use it directly. It is prohibited to add water, as adding water will dilute the effective solid content of the product and greatly reduce its viscosity to failure.

Q: Does applying adhesive on the back of ceramic tiles affect tiling the next day?

A: No impact. As long as the adhesive is kept in a dry environment, avoiding water immersion and dust pollution, it is sufficient.

Q: Can we use adhesive to directly apply tiles?

A: Cannot. Suggest using it in combination with Lanton tile adhesive.