Lanton ultra strong and effective ceramic tile adhesive (specifically for vitrified tiles) uses a high polymer reinforced cement-based dry mix slurry. Specially designed for pasting vitrified bricks. Compared with traditional cement paste pasting method, it is safer, more durable, and has a lower shrinkage rate. Not cracking and greatly simplifying construction, reducing labor costs. And it has passed the indoor environmental quality certification, which is green, environmentally friendly, and healthy and safe.

Product number: LD-3102

Product specifications: 20KG

Wide applicability

Professional for bonding high-end indoor tiles with low water absorption, such as vitrified tiles

Construction steps

1. Mix the ceramic tile adhesive with water and mix evenly

2. Spread the evenly mixed tile adhesive evenly on the back of the tile

3. Ceramic tiles on the wall

Matters needing attention

1. This product is ready for use with water added according to the reference ratio, and the addition of other materials is prohibited.

2. The construction temperature is between 5 ℃ and 35 ℃.

3. The water powder ratio can be adjusted appropriately due to differences in substrate, weather, construction conditions, etc.

4. When constructing on rainy days, it is necessary to take protective measures and ensure that the tiles are not soaked by rainwater.

5. The adhesive should be used within 2-3 hours according to weather conditions, and it is important to avoid mixing dried adhesive with water before use.

6.After the laying of bricks is completed, the next step of joint filling work can only be carried out after the adhesive has completely dried and solidified; The scraping and application of ceramic tile adhesive should be uniform and fully applied.

7.When laying ceramic tiles, there must be a gap of ≥ 2mm between the tiles; When laying the wall, pay attention to taking temporary fixing measures.